RTU5024 Comandi SMS

22 comandi. Tocca il pulsante copia per copiare il comando di esempio, poi incollalo nella tua app SMS.

Nota: Commands use NO # delimiters (unlike Callny). Password is 4 digits. Up to 200 authorized numbers (positions 001-200). Commands must be CAPS LOCK. Device will NOT reply if command is invalid (for security).

Password predefinita: 1234

Initialize (REQUIRED first step)

admin

Register the module's SIM card number. This is the FIRST command you must send. Use 00 prefix instead of +.

Sintassi

{pwd}TEL{moduleSIM}#

Esempio

1234TEL00861351015#

Risposta

Set Success!

Sync clock

admin

Set the module's internal clock. Required for time-limited users to work correctly.

Sintassi

{pwd}T{YYMMDDHHmm}#

Esempio

1234T2603291530#

Risposta

Set Time OK!

Change password

admin

Change device password to new 4-digit password.

Sintassi

{pwd}P{newpwd}

Esempio

1234P6666

Risposta

Password changed to {newpwd}, please remember it carefully.

Add permanent user

admin

Add authorized user to slot (001-200). Always allowed to call and control.

Sintassi

{pwd}A{slot}#{phone}#

Esempio

1234A003#123456#

Risposta

User added confirmation

Add time-limited user

admin

Add user with access limited to a date/time range. Clock must be synced first.

Sintassi

{pwd}A{slot}#{phone}#{startYYMMDDHHmm}#{endYYMMDDHHmm}#

Esempio

1234A016#123456#1502050800#1502051000#

Risposta

User added confirmation

Query user by slot

admin

Check which phone number is stored at a position.

Sintassi

{pwd}A{slot}#

Esempio

1234A002#

Risposta

Phone number at slot or Empty

Batch query users

admin

Query authorized numbers from slot range. Returns multiple SMS (10 numbers per SMS).

Sintassi

{pwd}AL{slotStart}#{slotEnd}#

Esempio

1234AL002#050#

Risposta

List of users across multiple SMS

Delete user

admin

Remove authorized number at position (or overwrite with new number).

Sintassi

{pwd}A{slot}##

Esempio

1234A002##

Risposta

User deleted

Allow all callers

admin

Allow any phone number to trigger the relay. WARNING: free access for anyone.

Sintassi

{pwd}ALL#

Esempio

1234ALL#

Risposta

Allow all mode set

Authorized users only (default)

admin

Only authorized numbers can trigger the relay. Recommended setting.

Sintassi

{pwd}AUT#

Esempio

1234AUT#

Risposta

Authorized only mode set

Set relay close time

admin

How long relay stays closed (ON) after call. 000=0.5s latch, 001-998=seconds, 999=stays on until next call.

Sintassi

{pwd}GOT{seconds}#

Esempio

1234GOT030#

Risposta

Relay time set

Configure relay ON SMS

admin

Set who receives SMS when relay turns ON and what it says. a=first user (0/1), b=caller (0/1).

Sintassi

{pwd}GON{ab}#{content}#

Esempio

1234GON11#DoorOpen#

Risposta

Confirmation set

Configure relay OFF SMS

admin

Set who receives SMS when relay turns OFF and what it says.

Sintassi

{pwd}GOFF{ab}#{content}#

Esempio

1234GOFF00#DoorClose#

Risposta

Confirmation set

Disable relay ON SMS

admin

No SMS notification when relay turns ON.

Sintassi

{pwd}GON##

Esempio

1234GON##

Risposta

ON notification disabled

Disable relay OFF SMS

admin

No SMS notification when relay turns OFF.

Sintassi

{pwd}GOFF##

Esempio

1234GOFF##

Risposta

OFF notification disabled

Relay ON (by SMS)

all authorized

Turn relay on via SMS command. Close time follows GOT setting.

Sintassi

{pwd}CC

Esempio

1234CC

Risposta

Relay ON (or custom GON content)

Relay OFF (by SMS)

all authorized

Turn relay off via SMS command.

Sintassi

{pwd}DD

Esempio

1234DD

Risposta

Relay OFF (or custom GOFF content)

Check status

all authorized

Query relay state, signal strength, and device info.

Sintassi

{pwd}EE

Esempio

1234EE

Risposta

Relay status, GSM signal value, firmware info

Set auto-report interval

admin

Auto-send status report to first user every X hours. 000=disabled (default).

Sintassi

{pwd}T#{hours}#

Esempio

1234T#024#

Risposta

Auto-report set

Query auto-report interval

admin

Check current auto-report interval.

Sintassi

{pwd}T#

Esempio

1234T#

Risposta

Current interval in hours

Query IMEI and firmware

admin

Get the module's IMEI code and firmware version.

Sintassi

{pwd}IMEI#

Esempio

1234IMEI#

Risposta

IMEI and firmware info

Factory reset

physical button or SMS

Reset to factory settings. Authorized users are preserved. Can also hold reset button on device.

Sintassi

RESET

Esempio

RESET

Risposta

Device restarts
Prendi GateOpener