RTU5024 Komendy SMS

22 komend. Dotknij przycisku kopiowania, skopiuj przykład i wklej do aplikacji SMS.

Uwaga: Commands use NO # delimiters (unlike Callny). Password is 4 digits. Up to 200 authorized numbers (positions 001-200). Commands must be CAPS LOCK. Device will NOT reply if command is invalid (for security).

Domyślne hasło: 1234

Initialize (REQUIRED first step)

admin

Register the module's SIM card number. This is the FIRST command you must send. Use 00 prefix instead of +.

Składnia

{pwd}TEL{moduleSIM}#

Przykład

1234TEL00861351015#

Odpowiedź

Set Success!

Sync clock

admin

Set the module's internal clock. Required for time-limited users to work correctly.

Składnia

{pwd}T{YYMMDDHHmm}#

Przykład

1234T2603291530#

Odpowiedź

Set Time OK!

Change password

admin

Change device password to new 4-digit password.

Składnia

{pwd}P{newpwd}

Przykład

1234P6666

Odpowiedź

Password changed to {newpwd}, please remember it carefully.

Add permanent user

admin

Add authorized user to slot (001-200). Always allowed to call and control.

Składnia

{pwd}A{slot}#{phone}#

Przykład

1234A003#123456#

Odpowiedź

User added confirmation

Add time-limited user

admin

Add user with access limited to a date/time range. Clock must be synced first.

Składnia

{pwd}A{slot}#{phone}#{startYYMMDDHHmm}#{endYYMMDDHHmm}#

Przykład

1234A016#123456#1502050800#1502051000#

Odpowiedź

User added confirmation

Query user by slot

admin

Check which phone number is stored at a position.

Składnia

{pwd}A{slot}#

Przykład

1234A002#

Odpowiedź

Phone number at slot or Empty

Batch query users

admin

Query authorized numbers from slot range. Returns multiple SMS (10 numbers per SMS).

Składnia

{pwd}AL{slotStart}#{slotEnd}#

Przykład

1234AL002#050#

Odpowiedź

List of users across multiple SMS

Delete user

admin

Remove authorized number at position (or overwrite with new number).

Składnia

{pwd}A{slot}##

Przykład

1234A002##

Odpowiedź

User deleted

Allow all callers

admin

Allow any phone number to trigger the relay. WARNING: free access for anyone.

Składnia

{pwd}ALL#

Przykład

1234ALL#

Odpowiedź

Allow all mode set

Authorized users only (default)

admin

Only authorized numbers can trigger the relay. Recommended setting.

Składnia

{pwd}AUT#

Przykład

1234AUT#

Odpowiedź

Authorized only mode set

Set relay close time

admin

How long relay stays closed (ON) after call. 000=0.5s latch, 001-998=seconds, 999=stays on until next call.

Składnia

{pwd}GOT{seconds}#

Przykład

1234GOT030#

Odpowiedź

Relay time set

Configure relay ON SMS

admin

Set who receives SMS when relay turns ON and what it says. a=first user (0/1), b=caller (0/1).

Składnia

{pwd}GON{ab}#{content}#

Przykład

1234GON11#DoorOpen#

Odpowiedź

Confirmation set

Configure relay OFF SMS

admin

Set who receives SMS when relay turns OFF and what it says.

Składnia

{pwd}GOFF{ab}#{content}#

Przykład

1234GOFF00#DoorClose#

Odpowiedź

Confirmation set

Disable relay ON SMS

admin

No SMS notification when relay turns ON.

Składnia

{pwd}GON##

Przykład

1234GON##

Odpowiedź

ON notification disabled

Disable relay OFF SMS

admin

No SMS notification when relay turns OFF.

Składnia

{pwd}GOFF##

Przykład

1234GOFF##

Odpowiedź

OFF notification disabled

Relay ON (by SMS)

all authorized

Turn relay on via SMS command. Close time follows GOT setting.

Składnia

{pwd}CC

Przykład

1234CC

Odpowiedź

Relay ON (or custom GON content)

Relay OFF (by SMS)

all authorized

Turn relay off via SMS command.

Składnia

{pwd}DD

Przykład

1234DD

Odpowiedź

Relay OFF (or custom GOFF content)

Check status

all authorized

Query relay state, signal strength, and device info.

Składnia

{pwd}EE

Przykład

1234EE

Odpowiedź

Relay status, GSM signal value, firmware info

Set auto-report interval

admin

Auto-send status report to first user every X hours. 000=disabled (default).

Składnia

{pwd}T#{hours}#

Przykład

1234T#024#

Odpowiedź

Auto-report set

Query auto-report interval

admin

Check current auto-report interval.

Składnia

{pwd}T#

Przykład

1234T#

Odpowiedź

Current interval in hours

Query IMEI and firmware

admin

Get the module's IMEI code and firmware version.

Składnia

{pwd}IMEI#

Przykład

1234IMEI#

Odpowiedź

IMEI and firmware info

Factory reset

physical button or SMS

Reset to factory settings. Authorized users are preserved. Can also hold reset button on device.

Składnia

RESET

Przykład

RESET

Odpowiedź

Device restarts
Zainstaluj GateOpener