RTU5024 SMS-kommandoer

22 kommandoer. Trykk på kopieringsknappen for å kopiere eksempelkommandoen, og lim den inn i SMS-appen din.

Merk: Commands use NO # delimiters (unlike Callny). Password is 4 digits. Up to 200 authorized numbers (positions 001-200). Commands must be CAPS LOCK. Device will NOT reply if command is invalid (for security).

Standardpassord: 1234

Initialize (REQUIRED first step)

admin

Register the module's SIM card number. This is the FIRST command you must send. Use 00 prefix instead of +.

Syntaks

{pwd}TEL{moduleSIM}#

Eksempel

1234TEL00861351015#

Svar

Set Success!

Sync clock

admin

Set the module's internal clock. Required for time-limited users to work correctly.

Syntaks

{pwd}T{YYMMDDHHmm}#

Eksempel

1234T2603291530#

Svar

Set Time OK!

Change password

admin

Change device password to new 4-digit password.

Syntaks

{pwd}P{newpwd}

Eksempel

1234P6666

Svar

Password changed to {newpwd}, please remember it carefully.

Add permanent user

admin

Add authorized user to slot (001-200). Always allowed to call and control.

Syntaks

{pwd}A{slot}#{phone}#

Eksempel

1234A003#123456#

Svar

User added confirmation

Add time-limited user

admin

Add user with access limited to a date/time range. Clock must be synced first.

Syntaks

{pwd}A{slot}#{phone}#{startYYMMDDHHmm}#{endYYMMDDHHmm}#

Eksempel

1234A016#123456#1502050800#1502051000#

Svar

User added confirmation

Query user by slot

admin

Check which phone number is stored at a position.

Syntaks

{pwd}A{slot}#

Eksempel

1234A002#

Svar

Phone number at slot or Empty

Batch query users

admin

Query authorized numbers from slot range. Returns multiple SMS (10 numbers per SMS).

Syntaks

{pwd}AL{slotStart}#{slotEnd}#

Eksempel

1234AL002#050#

Svar

List of users across multiple SMS

Delete user

admin

Remove authorized number at position (or overwrite with new number).

Syntaks

{pwd}A{slot}##

Eksempel

1234A002##

Svar

User deleted

Allow all callers

admin

Allow any phone number to trigger the relay. WARNING: free access for anyone.

Syntaks

{pwd}ALL#

Eksempel

1234ALL#

Svar

Allow all mode set

Authorized users only (default)

admin

Only authorized numbers can trigger the relay. Recommended setting.

Syntaks

{pwd}AUT#

Eksempel

1234AUT#

Svar

Authorized only mode set

Set relay close time

admin

How long relay stays closed (ON) after call. 000=0.5s latch, 001-998=seconds, 999=stays on until next call.

Syntaks

{pwd}GOT{seconds}#

Eksempel

1234GOT030#

Svar

Relay time set

Configure relay ON SMS

admin

Set who receives SMS when relay turns ON and what it says. a=first user (0/1), b=caller (0/1).

Syntaks

{pwd}GON{ab}#{content}#

Eksempel

1234GON11#DoorOpen#

Svar

Confirmation set

Configure relay OFF SMS

admin

Set who receives SMS when relay turns OFF and what it says.

Syntaks

{pwd}GOFF{ab}#{content}#

Eksempel

1234GOFF00#DoorClose#

Svar

Confirmation set

Disable relay ON SMS

admin

No SMS notification when relay turns ON.

Syntaks

{pwd}GON##

Eksempel

1234GON##

Svar

ON notification disabled

Disable relay OFF SMS

admin

No SMS notification when relay turns OFF.

Syntaks

{pwd}GOFF##

Eksempel

1234GOFF##

Svar

OFF notification disabled

Relay ON (by SMS)

all authorized

Turn relay on via SMS command. Close time follows GOT setting.

Syntaks

{pwd}CC

Eksempel

1234CC

Svar

Relay ON (or custom GON content)

Relay OFF (by SMS)

all authorized

Turn relay off via SMS command.

Syntaks

{pwd}DD

Eksempel

1234DD

Svar

Relay OFF (or custom GOFF content)

Check status

all authorized

Query relay state, signal strength, and device info.

Syntaks

{pwd}EE

Eksempel

1234EE

Svar

Relay status, GSM signal value, firmware info

Set auto-report interval

admin

Auto-send status report to first user every X hours. 000=disabled (default).

Syntaks

{pwd}T#{hours}#

Eksempel

1234T#024#

Svar

Auto-report set

Query auto-report interval

admin

Check current auto-report interval.

Syntaks

{pwd}T#

Eksempel

1234T#

Svar

Current interval in hours

Query IMEI and firmware

admin

Get the module's IMEI code and firmware version.

Syntaks

{pwd}IMEI#

Eksempel

1234IMEI#

Svar

IMEI and firmware info

Factory reset

physical button or SMS

Reset to factory settings. Authorized users are preserved. Can also hold reset button on device.

Syntaks

RESET

Eksempel

RESET

Svar

Device restarts
Skaff GateOpener